Unbrick | Flash LG G Pad 7 | 8.3 | 10.1 WI-FI | LTE

All steps to flash a official kdz file to your LG G Pad 10.1

Downloads:
LG G Pad 10.1 Wi-Fi V700n Lollipop
LG G Pad 10.1 LTE VK700 KitKat
LG G Pad 8.3 V500 
LG G Pad 7 LTE V410
LG Drivers
LG Flash Tool

1. Extract and install LG Drivers.
2. Extract and run as administrator LG Flash Tool.
3. In LG Flash Tool change the Select Type option to 3GQCT and the Phone Mode option to EMERGENCY, after that select the downloaded kdz file.
4. Now with your tablet powered off, press and hold vol + and connect USB to your computer and wait until tablet boot in Download Mode.
5. Release vol + key.
6. Now in LG Flash Tools select CSE Flash, in the next window select Start and the next one select OK (Dont change anything here).
7. Wait until it finishes and tablet boot normally and it's done.


Obs: If your tablet stuck in bootloop, reboot your tablet into recovery mode ( Power off > press volume down and power until appears LG logo, release for 1 second and press again > press yes on next message) and do a Factory Reset.